Canon Oce PlotWave 300 Administration Manual page 371

2. In order to view and check the self-signed certificate, continue to add an exception.
3. Click 'I Understand the Risks' and 'Add Exception...'
4. In the 'Add Security Exception' window, click 'Get Certificate' to get the certificate from the
controller web server.
The 'Wrong site' and 'Unknown Identity' errors are displayed.
5. Click 'View...' to see the content of the certificate.
Check the following values:
Common Name (CN) = Océ Express WebTools
Organization (O) = Océ
Organization Unit (OU) = WFPS
6. The certificate is issued to 'OcéExpress WebTools' by 'Océ Express WebTools', so you can
confirm the security exception (permanent or temporary exception).
7. A security warning window may pop-up. Click 'Yes' to continue.
Result
The Océ Express WebTools software opens.
You can check in the status bar (at the bottom of the window) that the padlock is displayed.
In the navigation bar, the Océ certificate is registered as an exception.
The identity of the remote controller and the encryption of the data on the network are secured.
Use the Océ self-signed certificate with Mozilla Firefox
Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700 371