User Authentication: The Standard Workflows - Canon Oce PlotWave 300 Administration Manual

User authentication: the standard workflows

User authentication: the standard workflows
Introduction
Find below the standard workflow for printing and the standard workflow for scanning/copying
when the user authentication is activated and configured on the Océ system.
Standard workflow for print
Step
1- Logging on a work-
station
2- Job submission
3- Authentication on
the printer
4- Job management
170 Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550
Action
The user logs in with his/her credentials.
Example: 'user1' on 'domain.com' and the associated password.
The user submits jobs using a printer driver (e.g. Océ WPD2) or a job
submitter (example: Océ Publisher Select 2)
The user logs in on the printer:
• either by typing his/her user name and password on the printer pan-
el
• or by using his/her smart card
The credentials used on the printer must be the same as the ones used
at the job submission time.
Example: 'user1' belonging to the domain 'domain.com'.
On the bottom right part of the panel (Smart Access), the user can see
the jobs submitted with his/her user credentials.
The user can check the jobs and change the settings.
4