Canon Oce PlotWave 300 Administration Manual page 360

Define the security rule
4. Select 'Negotiate security' and click 'Next'
5. Select 'Allow unsecured communication if a secure connection cannot be established' or 'Fall
back to unsecured communication' (depending on the Operating System) and click 'Next'
6. Select 'Custom' and click on the 'Settings...' button
7. Configure the settings as below
'Data and address integrity without encryption (AH)' setting is not mandatory.
8. Click 'OK' and 'Next', then 'Finish'
Define the security rule
Procedure
1. In the console, right click on the IP security policy just created and select 'Properties' to open the
wizard
(On Windows 7, a new window opens: check that "Use Add Wizard" is checked, then click on
"Add")
360 Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700