Canon Oce PlotWave 300 Administration Manual page 42

Configure the IPsec settings in the Océ controller
Enable and configure the parameters for each required station.
The parameters can be different for each different workstation:
- the IP address
- the preshared key (keep the generic default one or set a custom one)
Configure the IPsec settings in the Océ controller
Before you begin
You must be logged as a System Administrator or a Power user.
Activate and configure IPsec in the printer/scanner controller
Procedure
1. Open a web browser and enter the system URL: https://<hostname>, to open the Océ Express
WebTools
2. Open the 'Configuration' - 'Connectivity' page
3. In 'IPsec generic' section, click 'Edit'
4. Check 'IPsec'
5. Keep 'Failsafe option' checked during the phase you configure the IPSec.
In case of need, this allows to be able to connect to the Océ Express WebTools from any
workstation in order to be able to change parameters.
42 Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300