Prevent Any Outgoing Connection To The Internet - Canon Oce PlotWave 300 Administration Manual

Prevent any outgoing connection to the Internet

Prevent any outgoing connection to the Internet
Introduction
Some features of the following systems allow or request a connection over the Internet to work
properly:
• Océ PlotWave 750
• Océ PlotWave 900 R2.x
When the Security Policy in a company prevents any outgoing network traffic over the Internet,
perform all the following actions in Express WebTools:
St In the Express WebT‐
ep ools section
1 Support - Remote Serv-
ice - Remote assistance
2 Preferences - System
Defaults - Service rela-
ted information
3 Configuration - Scan
destination [X]
4 Support - About - Shut-
down - Restart
74 Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
Action
Stop the Remote assistance if it is
activated
Disable Online Services
Disable all scan destinations to FTP
sites reachable through the Internet
Restart the system
Detail
Click 'Stop remote assis-
tance' until it changes into
'Allow remote assistance' .
The two blinking arrows
on the right side disap-
pear.
Set 'Océ Online Services
connection enabled' to
'Disabled'
Uncheck 'Scan destination
[X]: enabled'