Canon Oce PlotWave 300 Administration Manual page 358

Create the filter list
2. In the 'Manage IP filter lists' tab click 'Add'
3. Enter a filter name and a description and click 'Add'
4. Click 'Next' to open the wizard
5. Check the 'Mirrored' checkbox and click 'Next'
6. Select 'My IP address' as the 'Source address and click 'Next'
7. Select 'A specific IP address or subnet' as 'Destination address' and enter the IP address of the
controller
358 Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700