Canon Oce PlotWave 300 Administration Manual page 256

Add the security snap-in
Purpose
Complete the IPsec configuration for a secure connection between the printer/copier system and
a workstation.
On the workstation, perform the 6 following actions:
Add the security snap in on page 256
1-
Create the security policy on page 257
2-
Create the filter list on page 258
3-
Define the filter actions and security negotiation on page 260
4-
5- Define the security rule on page 261
Assign the security policy on page 263
6-
NOTE
The procedure below shows the configuration steps on Windows server 2008.
The procedure is similar on other Operating Systems (Windows Server 2003, Windows XP,
Windows Vista, Windows 7)
Add the security snap-in
Procedure
1. In the 'Start' - 'Run' window, enter 'mmc' to open the management console
2. In the top menu select 'File' - 'Add/Remove Snap-in'
3. Select 'IP Security Policy Management' and click 'Add' to add it to the root console
4. Keep 'Local computer' checked and click 'Finish'
The security snap-in is added, click 'OK'
256 Chapter 5 - Security on Océ ColorWave 550/600/650 (and Poster Printer)