Enable User Authentication - Canon Oce Colr Wave 500 Operation Manual

Enable User authentication

Enable User authentication
Introduction
You can enable User authentication in Océ Express WebTools.
With User authentication enabled:
• users have to authenticate to get access to the system
• users will see only their own jobs
• [Direct print] is disabled
• [Locking of the user panel via the Océ Wave interface] is disabled
• [Copy job priority] is disabled
NOTE
For more details on User authentication see the Océ PlotWave-ColorWave Systems Security
manual.
Procedure
1. Open the [Security] - [Configuration] tab.
2. In the [User access mode] section, click on the [User authentication] field.
3.
Change the [User authentication] setting to the required authentication.
• [User name and password]: the user has to enter his credentials (domain, user name and
password) to get access to the system
• [Smart card]: the user has to use a smart card to get access to the system
A license is required for the use of a smart card.
4.
Click OK to confirm.
106 Chapter 3 - Define your Workflow with Océ Express WebTools