Auto Answer; Ending Calls - Yealink SIP-T42S User Manual

Press
-
Press
The incoming call is answered and the original call is placed on hold.

Auto Answer

You can use auto answer feature to automatically answer an incoming call using the
speakerphone. Auto answer is configurable on a per-line basis.
You can choose to mute the local microphone when an incoming call is answered automatically.
To configure auto answer via phone user interface:
Press Menu->Features->Auto Answer.
1.
Press
2.
field.
Press
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.
The icon
the default account.
Auto answer is configurable via web user interface at the path Account->Basic.
Note Auto answer only takes effect when there is no other call in progress on the phone. If there is a
call in progress, the second incoming call cannot be automatically answered after ending the
current call by default. If you want to make the phone automatically answer the incoming call
after ending all calls, contact your system administrator for more information.

Ending Calls

To end a call:
Do one of the following:
If you are using the handset, press
-
If you are using the headset, press
-
If you are using the speakerphone, press
-
Note When a call is placed on hold, you cannot press
key to resume the call, and then press
to access the new call.
or the Answer soft key.
or , or the Switch soft key to select the desired account from the Line ID
or , or the Switch soft key to select Enabled from the Status field.
appears on the LCD screen only when the auto answer feature is enabled for
, the End Call soft key or hang up the handset.
, or the End Call soft key.
, or the End Call soft key.
to end it. You should press the Resume soft
to end it.
Basic Call Features
95