Ftp Client Ipv6 Source - HP 6125XLG Command Reference Manual

server. Make sure the interface is up and has the primary IPv4 address configured. Otherwise, the
transmission fails.
ip source-ip-address: Specifies the source IP address for outgoing FTP packets. It must be the IPv4 address
of an interface in up state. Otherwise, the transmission fails.
Usages guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the ftp command takes precedence over the source address specified
with the ftp client source command.
The source address specified with the ftp client source command applies to all FTP connections. The
source address specified with the ftp command applies only to the current FTP connection.
Examples
# Specify the source IPv4 address for outgoing FTP packets as 192.168.20.222.
<Sysname> system-view
[Sysname] ftp client source ip 192.168.20.222
Related commands
ftp

ftp client ipv6 source

Use ftp client ipv6 source to specify the source address for FTP packets sent by the IPv6 FTP client.
Use undo ftp client ipv6 source to restore the default.
Syntax
ftp client ipv6 source { interface interface-type interface-number | ipv6 source-ipv6-address }
undo ftp client ipv6 source
Default
No source address is configured. The device automatically selects a source IPv6 address as defined in
RFC 3484.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the source interface by its type and number. The IPv6
address configured on the source interface is the source address of outgoing FTP packets. Make sure the
interface is up. Otherwise, the transmission fails.
ipv6 source-ipv6-address: Specifies the source IPv6 address for outgoing FTP packets. It must be the IPv6
address of an interface in up state. Otherwise, the transmission fails.
Usages guidelines
If you execute this command multiple times, the most recent configuration takes effect.
92