Timer Response-Timeout (Hwtacacs Scheme View) - HP 5920 Command Reference Manual

Parameters
minutes: Real-time accounting interval in minutes, in the range of 0 to 60. Setting this interval to 0
disables the device from sending online user accounting information to the HWTACACS accounting
server.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is used to set the interval.
Different real-time accounting intervals impose different performance requirements on the device and the
HWTACACS server. A shorter interval helps achieve higher accounting precision but requires higher
performance. Use a longer interval when there are a large number of users (1000 or more).
Table 8 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
Related commands
display hwtacacs scheme

timer response-timeout (HWTACACS scheme view)

Use timer response-timeout to set the HWTACACS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The HWTACACS server response timeout time is 5 seconds.
Views
HWTACACS scheme view
Real-time accounting interval
3 minutes
6 minutes
12 minutes
15 minutes or longer
78