Rear Terminal Layout - GE 750 Instruction Manual

Mechanical Installation

Rear Terminal Layout

WARNING
WARNING
GE Multilin
A broad range of applications are available for the 750/760 relays. As such, it is not
possible to present typical connections for all possible schemes. The information in
this section will cover the important aspects of interconnections, in the general
areas of instrument transformer inputs, other inputs, outputs, communications and
grounding. The figure below shows the rear terminal layout of the 750/760.
Relay contacts must be considered unsafe to touch when system is
energized! If the customer requires the relay contacts for low voltage
accessible applications, it is their responsibility to ensure proper insulation
levels!
HAZARD may result if the product is not used for its intended purposes.
FIGURE 3–9: Rear Terminal Layout
The rear terminal assignments are indicated on the following table.
http://www.GEmultilin.com
750/760
Feeder Management Relay
3–5