GE 750 Instruction Manual page 16

750/760
Feeder Management Relay
SETPOINTS
MESSAGE
Press
SETPOINTS
S1 RELAY SETUP
MESSAGE
Press
SETPOINTS
S2 SYSTEM SETUP
MENU
Press
SETPOINTS
Press MESSAGE
SETPOINTS
S1 RELAY SETUP
Press MESSAGE
SETPOINTS
S2 SYSTEM SETUP
1–8
Press the MENU key until the relay displays the setpoints menu header.
[ ]
[ ]
Press
[ ] CURRENT
MESSAGE
SENSING
VALUE
Press the
enter the value directly via the numeric keypad.
To set the ground bus VT connection type, modify the
SENSING VT CONNECTION TYPE
Press the MENU key until the relay displays the setpoints menu header.
[ ]
[ ]
Press
[ ] CURRENT
MESSAGE
SENSING
Press
BUS VT SENSING
MESSAGE
Press the VALUE
To set the secondary voltage, modify the
NOMINAL VT SECONDARY VOLTAGE
http://www.GEmultilin.com
Press
[ ]
MESSAGE
Press
MESSAGE
keys until 100 A is displayed, or
Press the ENTER key to store the
setpoint.
setpoint as shown below.
[ ]
Press
[ ]
MESSAGE
keys until the value of "Delta"
appears on the display.
ENTER
Press the key to store the
setpoint.
S2 SYSTEM SETUP
setpoint as shown below.
Changing Setpoints
PHASE CT PRIMARY:
1000 A
GND CT PRIMARY:
50 A
GND CT PRIMARY:
100 A
NEW SETPOINT
STORED
S2 SYSTEM SETUP BUS VT
VT CONNECTION TYPE:
Wye
VT CONNECTION TYPE:
Delta
NEW SETPOINT
STORED
BUS VT SENSING
GE Multilin