GE 750 Instruction Manual page 82

750/760
Feeder Management Relay
4–20
b) Downloading and Saving Setpoints Files
Setpoints must be saved to a file on the local PC before performing any firmware
upgrades. Saving setpoints is also highly recommended before making any setpoint
changes or creating new setpoint files.
The EnerVista 750/760 Setup window, setpoint files are accessed in the Settings List
control bar window or the Files Window. Use the following procedure to download
and save setpoint files to a local PC.
1. Ensure that the site and corresponding device(s) have been properly defined
and configured as shown in Connecting EnerVista 750/760 setup to the Relay on
page 4–14.
2. Select the desired device from the site list.
3. Select the File > Read Settings from Device menu item to obtain settings
information from the device.
4. After a few seconds of data retrieval, the software will request the name and
destination path of the setpoint file. The corresponding file extension will be
automatically assigned. Press Save to complete the process. A new entry will
be added to the tree, in the File pane, showing path and file name for the
setpoint file.
c) Adding Setpoints Files to the Environment
The EnerVista 750/760 Setup software provides the capability to review and
manage a large group of setpoint files. Use the following procedure to add a new or
existing file to the list.
1. In the files pane, right-click on 'Files' and select the Add Existing Setting File
item as shown:
2. The Open dialog box will appear, prompting the user to select a previously
saved setpoint file. As for any other MS Windows
file to be added then click Open. The new file and complete path will be added
to the file list.
d) Creating a New Setpoint File
The EnerVista 750/760 Setup software allows the user to create new setpoint files
independent of a connected device. These can be uploaded to a relay at a later date.
The following procedure illustrates how to create new setpoint files.
1. In the File pane, right click on 'File' and select the New Settings File item. The
EnerVista 750/760 Setup software displays the following box will appear,
http://www.GEmultilin.com
Working with Setpoints and Setpoint Files
®
application, browse for the
GE Multilin