Installation Procedures - Siemens hipath 1100 Service Manual

Installation

Installation Procedures

4.2 Installation Procedures
Warning
!
Before installing the equipment, read carefully all information and recommendations
provided in Chapter 1, "Important Information"
When connecting to digital lines of terminals powered by an external AC power
source, the maximum number of terminal equipment allowed is 14 per system. Ex-
ceeding this limit may damage the equipment and present a hazard to the safety of
the user.
Table 4-1 HiPath 1100 - Equipment installation procedures
Step Installation Procedures (Information)
1.
2.
3.
4.
5.
6. "Connecting Extensions to the System's Internal MDF (Main
7.
8.
9.
10.
11. "Recommendations concerning the Power Supply and Protec-
12.
13.
14.
15.
4-2
"Select the location for installing the equipment"
(Usually already setup)
"Unpacking System Components"
"Getting to Know your Systems"
"HiPath1120/1130/1150 Wall Mounting Instructions"
"Installation of Expansion and Option Modules"
Distribution Frame)"
"Installing a V.24 Interface"
"Installing an USB Interface"
"Installing an External Audio Source"
"Installing a TFE - Entrance Telephone Interface"
tion of the System"
"Protective Power Outage Relays"
"System Cabling"
"Installing Telephone Terminals"
"Performing a Visual Inspection"
For internal distribution only
page 4-4
page 4-4
page 4-5
page 4-8
page 4-16
page 4-32
page 4-38
page 4-39
page 4-40
page 4-40
page 4-42
page 4-45
page 4-46
page 4-46
page 4-48
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual