External Message Waiting Indicator (Mwi) - Siemens hipath 1100 Service Manual

Configuring the System Specifically for the Client
Comments about the System's Programming Codes
MSN DISA (019)
This specifies from which MSN the DISA features will run.
External Line DISA (020)
This setting specifies an external line and the timeout for DISA answering.
The system allows only one DISA call. When there is a DISA call in progress, a second
call to a DISA external line or one with a DISA answering mode is treated as a regular
call. If a call is received over an external line configured as a Fax/DID and DISA, the
call is answered by the Fax/DID. If no digits are entered, the call is forwarded to the
DISA after a specified timeout.

7.2.5 External Message Waiting Indicator (MWI)

With this feature a group of extensions called an External MWI Group is able to re-
ceive signals generated by the Voice Mail Server that indicate when there is a mes-
sage waiting in the user's mailbox.
For standard telephones with a display MWI will only be indicated if a CLIP is con-
figured for the extension using option 3 or 4 ("Caller ID for analog extension (CLIP)"
on page 7-7).
Activating External Message Waiting Indicator (014)
Activates the MWI feature for a group of extensions.
External MWI Group (015)
Extensions configured in this group are allowed to receive a Message Waiting Indica-
tor from an external Voice Mail Server where user's messages and announcements
are stored.
Message Waiting server number (065)
This setting specifies a MSN number for the Waiting Message server.
7-34
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual