Installation
Installation of Expansion and Option Modules
4.6.7 Installing a Music Module
On the HiPath 1120
●
Installation Procedures
Step
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Installation Diagram
Figure 4-23
4-28
Procedure
Turn off the power supply.
Remove the system's cover
Raise the system's top slot (MB).
Insert the module in the slot show on Figure 4-23.
Attach the MB to the module.
Make the connections to the appropriate module connector (see"Music
Module" on page 3-41).
Reassemble the entire set.
"Performing a Visual Inspection" on page 4-48.
Turn on the power supply.
Configure the required data (see "Operation" on page 6-1).
Installing a Music Module HiPath 1120
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual