Installation
Installation of Expansion and Option Modules
Step
8.
9.
10.
Installation Diagram
Figure 4-21
On the HiPath 1190/1190R
●
Installation Procedures
Step
1.
2.
3.
4.
5.
6.
7.
4-26
Procedure
"Performing a Visual Inspection" on page 4-48.
Turn on the power supply.
Configure the required data (see "Operation" on page 6-1).
Installing a Fax/DID Module HiPath 1130/1150
Procedure
Turn off the power supply.
Remove the system's front cover.
Disconnect the Main Distribution Frame's cables from the CPU.
Move the module's latch as shown in Figure 4-14.
Remove the CPU.
Attach the separator provided with the Fax/DID module to the CPU.
Attach the module to the CPU's pin connector and the separator.
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual