Siemens hipath 1100 Service Manual page 178

Operation
Starting the Programming Mode
HiPath 1100 Manager
The HiPath 1100 Manager is an administrative program for programming the HiPath
1100 systems without using a telephone set.
The system can be accessed locally through a LAN as long as there is a network PC
connected to the HiPath 1100 via serial interface or an ADSL module.
You can also update the HiPath 1100 software using the
HiPath 1100 Software Update and store the database containing the system config-
uration settings. Read the HiPath 1100 Manager Help file before proceeding with this
operation.
HiPath 1100 ADSL Manager
The HiPath 1100 ADSL Manager is an administrative program for programming an
ADSL module.
Hardware Requirements:
– 10/100 BaseT network interface card
General Information:
– TCP/IP protocol
– Default IP: 10.0.0.1
– Default Subnet Mask : 255.255.255.0.
If you need to reset the IP or Subnet Mask, enter code 013 for "Restoring an ADSL
Module Default Settings."
When using an ADSL module, do not connect the V.24 serial interface adapter cable
to the PABX
After activating ADSL access to your provider and connecting to the HiPath 1100, you
must configure the appropriate settings for WAN and LAN connection. The HiPath
1100 ADSL Manager software application was designed for this purpose. It provides
viewing, editing and updating capabilities for system configuration.
For more details on how to configure an ADSL module see the HiPath 1100 ADSL
Manager "Help" system.
6-26
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual