Adsl Module; Relay And Sensor On The Hipath 1120 - Siemens hipath 1100 Service Manual

Configuring the System Specifically for the Client
Comments about the System's Programming Codes

7.2.13 ADSL Module

This provides connection for network PCs for sharing ADSL access, without requiring
a splitter, modem, additional ADSL, hub or network cards in any of the PCs.
The PCs are connected to the HiPath 1100 which provides (via LAN) the same func-
tions provided by the V.24 serial interface for integrating the HiPath 1100 Manager,
Interaction Center Smart and billing applications.
To configure the ADSL module correctly you need information about the VPI/VCI pro-
tocols, DNS servers, user name and password used by the carrier.
All the PCs must have a network card installed and must be on the same network as
the ADSL module used as a gateway for accessing the Internet.
When using an ADSL module, do not connect the V.24 serial interface adapter cable
to the PABX. All data is delivered through the network.
Restore ADSL Module Default Settings (013)
This code restores the default configuration of the ADSL module assuming an IP of
10.0.0.1.
7.2.14 Relay and sensor on the
You can connect a Music module to the HiPath 1120 system. This module also pro-
vides a Relay and a Sensor for integrating other devices such as an Entrance Tele-
phone, a Door Opener etc.
Sensor:
When the state of a sensor changes (for example, when the sensor changes from an
open contact to a closed contact), the following functions can be executed:
Selection of a number in the Speed Dialing Directory (Phonebook)
●
Activation of a relay
●
Dialing a number from the Speed Dialing directory and activating a relay.
●
The activation logic based on the initial position of the sensor contacts as well as its
resulting actions are programmable.
Relay:
The relay can be activated via the sensor, assuming that the sensor is configured. It
can be activated manually or automatically after a specified time. When the relay is
activated, the contacts close. When it is deactivated, the contacts open.
The name assigned to this position may have up to 15 characters.
7-50
HiPath 1120
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual