For internal distribution only
Module Installation Procedure
Step
1.
2.
3.
4.
Installation on a 19" Rack
Figure 4-15
Rack-Mounting Procedure
Step
1.
2.
3.
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Procedure
Insert module into the appropriate slot.
Move the latch to the right to secure each module in place.
Secure each latch using the screws.
Use the reverse procedure to remove the modules.
Installing the HiPath 1190R on a 19" rack
Procedure
Install the system's brackets on the 19" rack using the screws as shown.
Insert the switch into the 19" rack.
Secure the switch on the 19" rack using the screws.
Installation
Getting to Know your Systems
4-15