Table 7-19 Table; Table 7-21 Cd Interface Assignment - Siemens hipath 1100 Service Manual

For internal distribution only
Overflow/Escape Extension (32)
An overflow extension only receives calls when the extension to which it is assigned
as overflow is not available.
The overflow extension can be accessed through the specified internal number and
cannot be used or programmed as a Fax extension.
Hotline (45)
This function lets you dial automatically a number previously programmed into the
Phonebook as soon as the handset is lifted.
Multiple extensions can dial a number programmed in the Phonebook.
Warmline (62)
It allows you to specify a period of time for activating the Hotline.
Each extension can have a different timeout set for the Warmline, from 0 to 9 sec-
onds.
Executive-Secretary (51)
Assigns multiple extensions (Secretary Telephones) to a main telephone set (Execu-
tive Telephone).
There are 8 groups available with 16 extensions each (all extensions must use system
telephones).
CD Interface Assignment (46)
It allows you to connect a system telephone to any extension slot.
The default setting for this assignment is:
Table 7-21
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Configuring the System Specifically for the Client
Comments about the System's Programming Codes
CD Interface Assignment
HiPath 1120
A1/B1 ⇒ C1/D1
A2/B2 ⇒ C2/D2
A3/B3 ⇒ C3/D3
A4/B4 ⇒ C4/D4
HiPath1130/1150/1190
A1/B1 ⇒ C1/D1
A2/B2 ⇒ C2/D2
A3/B3 ⇒ C3/D3
A4/B4 ⇒ C4/D4
7-31