Siemens hipath 1100 Service Manual page 113

For internal distribution only
Step
6.
7.
8.
Installation Diagram
Figure 4-20
On the HiPath 1130/1150
●
Installation Procedures
Step
1.
2.
3.
4.
5.
6.
7.
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Procedure
"Performing a Visual Inspection" on page 4-48.
Turn on the power supply.
Configure the required data (see "Operation" on page 6-1).
Installing a Fax/DID ModuleHiPath 1120
Procedure
Remove the power supply.
Remove the Main Distribution Frame's cover.
Remove the backplane.
Remove the slots above the MB.
Attach the separator provided with the module to the MB.
Attach the module to the MB's pin connector and to the separator.
Reassemble the entire set.
Installation of Expansion and Option Modules
Installation
4-25