Figure 6-3 Hipath 1100 Manager Configuration - Analog Modem - Siemens hipath 1100 Service Manual

For internal distribution only
8. After restarting the computer, check the default modem (US Robotics) configu-
ration on the HiPath 1100 Manager and change the following settings to match
your modem (see the modem's manual, if necessary):
Figure 6-3
9. On the HiPath 1100 remote system, check the default modem configuration (US
Robotics) and change the following settings on the CommServer to match your
modem (see the modem's manual, if necessary):
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
HiPath 1100 Manager Configuration - Analog Modem
Starting the Programming Mode
Operation
6-9