Siemens hipath 1100 Service Manual page 156

Operation
Starting the Programming Mode
Basic Requirement:
IBM PC, Pentium 333 MHz processor (minimum)
●
128 MB RAM (minimum)
●
Microsoft Windows 98 SE, Windows 2000, Windows ME, Windows NT 4.0 (Ser-
●
vice Pack 3) or Windows XP
SVGA Color Monitor, 800x600 resolution (minimum)
●
Free disk space: 150 MB (minimum).
●
Installation:
The system may be programmed using a computer by selecting one of the following
options:
Computer <--> HiPath 1100 Connection
With an S
With a V.24 Serial Interface
With an ADSL Module
With an Analog Modem
With an USB Interface: Without using online services
With an USB interface: Using online services
S Module
0
For this option, only the HiPath 1100 applications are installed. After restarting the
computer configure the settings on the CommServer.
6-4
Module
0
For internal distribution only
Page
page 6-4
page 6-6
page 6-7
page 6-8
page 6-
12
page 6-
13
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual