Siemens hipath 1100 Service Manual page 174

Operation
Starting the Programming Mode
10. Click "Next" to proceed.
Figure 6-19
11. A message appears twice to the effect that the driver does not have a Windows
logo. Click "Continue" every time this message appears.
12. In the Select Port Number window select the port number for the HiPath 1000
Virtual COM Port (by default, the last free COM port).
13. A message appears indicating that the hardware selected is installed. Click "Fin-
ish" to complete installation.
Figure 6-20
14. The installation of the USB drivers is now completed. CAPI applications installa-
tion will now start automatically (see "Installing CAPI Applications" on page 6-
23).
6-22
Windows XP - Driver location
Windows XP - Port selection
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual