Table of Contents
Advertisement
2.
Starting with either the left or right side of the rack, align the back of the
slide-rail assembly against the inside of the back rack rail, and push until the
assembly locks into place with an audible click.
Align the front of the slide-rail assembly against the outside of the front rack rail,
3.
and push until the assembly locks into place with an audible click.
4.
Repeat Step 1 through Step 3 to attach the slide-rail assembly to the other side
of the rack.
Related Information
"Install Mounting Brackets on the Server" on page 44
■
Attach the Slide-Rails
Installing the Server Into a Rack
51
Advertisement
Table of Contents
Troubleshooting
