Rapid Storage Technology Enterprise (Rste) - Oracle X7-2 Installation Manual

Hide thumbs Also See for X7-2:
Table of Contents

Advertisement

13.
Select Confirm, select Enabled, and press Enter.
14.
To save your new boot configuration, select Yes.
15.
To exit the Avago MegaRAID Utility, press the ESC.

Rapid Storage Technology Enterprise (RSTe)

You can create and manage RAID arrays on the Oracle Servers X7-2 and X7-2L SATA M.2
(SSDs) using Intel Rapid Storage Technology Enterprise (RSTe) which provides the following
benefits:
Additional protection from data loss.
Data is protected against a drive failure when you configure your system for RAID level 1
(mirror).
Additional advantage of allowing an operating system to install directly to the RAID
volume.
BIOS exports the volumes as a target device to the operating system installer, streamlining
the OS installation.
The OS uses the system CPUs to manage and configure the RAID volumes.
Configure RAID Using the Avago MegaRAID Configuration Utilities
Configuring Storage Drives for Operating System Installation
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

X7-2l

Table of Contents