Table of Contents
Advertisement
b.
Use your right thumb to pull the connector A release lever to the right, away
from the left slide-rail (callout 1), and use your left hand to pull the connector
out of the slide-rail [frames 1 and 2].
Callout
1
Remove the CMA from the rack and place it on a flat surface.
8.
9.
Go to the front of the server and push it back into the rack.
Related Information
"Install the Cable Management Arm (Optional)" on page 54
■
Remove the Cable Management Arm
Description
Connector A release lever
Installing the Server Into a Rack
69
Advertisement
Table of Contents
Troubleshooting
