Oracle X7-2 Installation Manual page 91

b. On the Connectivity page, click the Tools button.
c. On the Network Tools page, in the Test Type list box, select Ping (for an
IPv4 configuration) or Ping6 (for an IPv6 network configuration).
If the test was successful, the message Ping of ip_address succeeded message
appears below the Destination field in the Network Configuration Test screen.
d. Type the IPv4 or IPv6 test destination address in the Destination field
and click Test.
From the Oracle ILOM CLI
■
a.
At the CLI prompt, type the show command to view the network test
targets and properties.
For example, the following output shows the test target properties:
-> show
/SP/network/test
Targets:
Properties:
Test the IPv4 or IPv6 Network Configuration
Using Oracle ILOM 91