Oracle X7-2 Installation Manual page 106

Configure RAID Using the Avago MegaRAID Configuration Utilities
9.
To enable drives, press Enter and select Enabled. Press ESC to close the pop up.
10.
Select Apply Changes, and press Enter.
For more information on performing this procedure, refer to the 12GB/s MegaRAID SAS
Software User's Guide located at https://docs.broadcom.com/docs/pub-005110.
11.
To return to the Create Virtual Drive Advanced Menu, press ESC.
12.
Select Save Configuration.
106 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017