Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 331

Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>access-egress
This command creates a text description stored in the configuration file for a configuration
Description
context.
The description command associates a text string with a configuration context to help identify the
context in the configuration file.
The no form of this command removes any description string from the context.
No description is associated with the configuration context.
Default
description-string — A text string describing the entity. Allowed values are any string up to 80 characters
Parameters
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
access-egress
Syntax access-egress policy-id [create]
no access-egress policy-id
Context config>qos
This command is used to create or edit an access egress QoS policy. The egress policy defines the
Description
remark policy for the traffic egressing on the access port. Remarking is disabled by default on the
access egress policies. The policy can be applied to multiple access ports. The access egress policy
is common to services (SAPs) that are all egressing on a particular port.
Any changes made to an existing policy are applied to all access ports on which the policy is
specified.
The system uses the access egress policy for marking only if the port with which this policy is
associated is enabled for port-based marking (that is, the command sap-qos-marking is set to
disable). When port-based marking is enabled, the system is capable of marking all the packets
7210 SAS M OS Quality of Service Guide Page 355