Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 175

Table 39: Show QoS Network Output Fields (Continued)
Forward Class/
FC Name
Profile
Accounting
Dot1p Bit Mapping:
Out-of-Profile
In-Profile
Port-Id
*A:SAS-M-A0-2>show>qos# network 1 detail
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id
Egr Remark
Forward Class
Scope
Accounting
Description
-------------------------------------------------------------------------------
DSCP
-------------------------------------------------------------------------------
be
ef
cs1
nc1
nc2
7210 SAS M OS Quality of Service Guide
Label
Specifies the forwarding class name.
Out —
out-of-profile, egressing on this queue.
In — Specifies the Dot1p markings for in-profile packets egressing
this queue.
Packet-based —
this policy do not account for packet framing overheads (such as
Ethernet the Inter Frame Gap (IFG) and the preamble), while
accounting for the bandwidth to be used by this flow.
Frame-based —
policy account for the packet framing overheads (such as for
Ethernet the IFG and preamble), while accounting the band-
width to be used by the flow.
Displays the Dot1p value used for out-of-profile traffic.
Displays the Dot1p value used for in-profile traffic.
Specifies the physical port identifier that associates the interface.
: 1
: False
: be
: Template
: packet-based
: Default network-port QoS policy.
Description
Specifies the Dot1p marking for the packets which are
Specifies that the meters associated with
Specifies that the meters associated with this
Profile
Policy Type
Forwarding Class
be
ef
l2
h1
nc
Show Commands
: Out
: port
Profile
Out
In
In
In
In
Page 183