Normal Qos Operation - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Normal QoS Operation

The following types of QoS mapping decisions are applicable on a network IP interface when
operating in network mode.
•
•
•
The default QoS mapping always exists on an IP interface and every received packet will be
mapped to this default if another explicitly defined matching entry does not exist.
The following types of QoS mapping decisions are applicable on a network port when operating in
network mode:
•
•
The default QoS mapping always exists on network port and every received packet will be mapped
to this default if another explicitly defined matching entry does not exist.
The following types of QoS mapping decisions are applicable on an access-uplink port when
operating in access-uplink mode:
•
•
The default QoS mapping always exists on an ingress access uplink port and every received packet
will be mapped to this default if another explicitly defined matching entry does not exist.
7210 SAS M OS Quality of Service Guide
MPLS LSP EXP value mapping to FC (if defined)
Default QoS mapping
MPLS LSP EXP mapping to profile
Ethernet Dot1P and IP DSCP value mapping (if defined) for use with IP packets
Default QoS mapping
Ethernet Dot1P value mapping (if defined)
Default QoS mapping
Network QoS Policies
Page 111