Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 163

Network Egress QoS Policy Forwarding Class Commands
fc
Syntax [no] fc fc-name [create]
Context config>qos>network>ingress
config>qos>network>egress
This command creates a class instance of the forwarding class. Once the fc-name is created,
Description
classification actions can be applied and it can be used in match classification criteria.
The no form of the command removes all the explicit meter mappings for fc-name forwarding
types. The meter mappings revert to the default meters for fc-name.
Undefined forwarding classes default to the configured parameters in the default policy policy-id
Default
1.
fc-name — The case-sensitive, system-defined forwarding class name for which policy entries will be
Parameters
created.
Values
create — The keyword used to create the forwarding class. The create keyword requirement can be
enabled/disabled in the environment>create context.
dot1p-in-profile
Syntax dot1p-in-profile dot1p-priority
no dot1p-in-profile
Context config>qos>network>egress>fc fc-name
This command specifies dot1p in-profile mappings.
Description
The no form of the command reverts to the default in-profile dot1p-priority setting for policy-id 1.
dot1p-priority — This value is a required parameter that specifies the unique IEEE 802.1P value that will
Parameters
match the Dot1p rule. If the command is executed multiple times with the same dot1p-value, the
previous forwarding class and enqueuing priority is completely overridden by the new parameters or
defined to be inherited when a forwarding class or enqueuing priority parameter is missing.
A maximum of eight dot1p rules are allowed on a single policy.
Values
7210 SAS M OS Quality of Service Guide
be, l2, af, l1, h2, ef, h1, nc
0 — 7
Operational Commands
Page 171