Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 315

•
The following displays the access egress QoS policy configuration:
Sample configuration with remarking set to "use-dscp":
*A:7210-SAS-M>config>qos>access-egress# info
----------------------------------------------
----------------------------------------------
*A:7210-SAS-M>config>qos>access-egress#
Sample configuration with remarking set to "all":
*A:7210-SAS-M>config>qos>access-egress# info
----------------------------------------------
7210 SAS M OS Quality of Service Guide
port are marked according to the FC-Dot1p marking map
Egress Policy ID 1 Definition, on page
or dscp or both dot1p and dscp, needs to be used for marking the packets egressing the
port.
If the user wants to change the FC-Dot1p or/and dscp marking map, the forwarding class
and the Dot1p or/and dscp marking values for the in-profile and out-profile packets must
be specified.
description "policy-1"
remarking use-dscp
queue 1
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
adaptation-rule cir max pir min
rate cir 10000 pir 11690
exit
queue 6
exit
queue 7
exit
queue 8
exit
fc be create
exit
description "policy-2"
remarking all
scope exclusive
queue 1
exit
queue 2
exit
queue 3
exit
queue 4
adaptation-rule cir max pir max
Access Egress QoS Policies
Table 26, Default SAPAccess
61. The user has the option to specify either dot1p
Page 339