Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 296

Hide thumbs Also See for 7210 SAS M OS:

Table of Contents

IP QoS Policy Match Commands

src-port {eq} src-port-number

src-port range start end

config>qos>sap-ingress>ip-criteria>entry>match

This command configures a source TCP or UDP port number or port range for a SAP QoS policy match

The no form of this command removes the source port match criterion.

No src-port match criterion.

eq src-port-number — The TCP or UDP port numbers to match specified as equal to (eq) to the source port

value specified as a decimal integer.

range start end — The range of TCP or UDP port values to match specified as between the start and end

source port values inclusive.

1 — 65535 (decimal hex or binary)

7210 SAS M OS Quality of Service Guide