Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 295

src-ip
Syntax src-ip {ip-address/mask | ip-address netmask}
no src-ip
Context config>qos>sap-ingress>ip-criteria>entry>match
config>qos>sap-egress>ip-criteria>entry>match
config>qos>sap-ingress>ipv6-criteria>entry>match
This command configures a source IP or IPv6 address range to be used as an SAP QoS policy match
Description
criterion.
To match on the source IP or IPv6 address, specify the address and its associated mask, e.g. 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 can also be used.
The no form of the command removes the source IP or IPv6 address match criterion.
No source IP match criterion.
Default
ip-address | ipv6-address — The IP or IPv6 address of the source IP interface. This address must be unique
Parameters
within the subnet and specified in dotted decimal notation.
Values
Values
Values
mask — The subnet mask length, expressed as an integer or in dotted decimal notation.
Values
netmask — Specify the subnet mask in dotted decimal notation.
Values
7210 SAS M OS Quality of Service Guide
ip-address: a.b.c.d
mask: 1 — 32
netmask a.b.c.d (dotted quad equivalent of mask length)
ipv4-prefix: a.b.c.d
ipv4-prefix-length: 0 -- 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
ipv6-prefix-length: 0 -- 128
netmask Specifies the subnet mask in dotted decimal notation.
0.0.0.0 - 255.255.255.255
0 — 32
a.b.c.d (dotted quad equivalent of mask length)
Operational Commands
Page 319