Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 250

Basic Configurations
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 1 + 0 + 1 + 0 = 2
FCl1 = 1 + 0 + 1 + 0 = 2
Since this FC uses unicast meter and multicast meter, an entry is needed to identify these traffic
types explicitly. Broadcast and unknown-unicast traffic is also classified using the same entry as
multicast and use the same meter.
FCaf = 1 + 0 + 1 + 0 = 2
Since this FC uses unicast meter, an entry is needed to identify these traffic types explicitly.
Another entry is needed to classify broadcast, multicast and unknown-unicast traffic type to the
same FC and use the default meter #11.
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 1 + 0 = 2
Using the above equation, the total classification entries used = 8 and meters used = 4.
If the same policy were to be used for a SAP in an Epipe service, then since all traffic is classified
to a unicast traffic type and since only unicast meters are used, the following:
FCnc = 0 + 0 + 0 + 0 = 0
FCh1 = 0 + 0 + 0 + 0 = 0
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 1 + 0 + 0 + 0 = 1
FCl1 = 1 + 0 + 0 + 0 = 1
FCaf = 1 + 0 + 0 + 0 = 1
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 0 + 0 = 1
Using the above equation, the total classification entries used = 4 and meters used = 2.
Page 274 7210 SAS M OS Quality of Service Guide