Copying And Overwriting Qos Policies - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Service Management Tasks

Copying and Overwriting QoS Policies

You can copy an existing network queue policy, rename it with a new policy ID name, or overwrite
an existing network queue policy. The
the destination policy ID exists.
CLI Syntax: config>qos# copy network-queue source-policy-id dest-policy-id
[overwrite]
Example: config>qos# copy network-queue nq1-cbs nq2-cbs
The following output displays the copied policies
*A:card-1>config>qos# info
#--------------------------------------------------
echo "QoS Slope and Queue Policies Configuration"
#--------------------------------------------------
.......
Page 202
network-queue "nq1-cbs" create
queue 1
rate cir 0 pir 32
adaptation-rule cir max
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
rate cir 0 pir 4
exit
queue 7
rate cir 3 pir 93
exit
queue 8
rate cir 0 pir 3
exit
exit
network-queue "nq2-cbs" create
queue 1
rate cir 0 pir 32
adaptation-rule cir max
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
option must be specified or an error occurs if
overwrite
7210 SAS M OS Quality of Service Guide