Modifying Port Level Egress-Rate Command - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Modifying Port Level Egress-Rate Command

To modify egress-rate parameters you can simply apply a egress-rate command with new egress-
rate and max-burst value.
The following displays the egress-rate configuration for a port:
*A:Dut-1>config>port# ethernet egress-rate 10000 max-burst default
*A:Dut-1>config>port# info
----------------------------------------------
----------------------------------------------
*A:Dut-1>config>port#
7210 SAS M OS Quality of Service Guide
ethernet
egress-rate 10000
exit
no shutdown
Port Level Egress Rate-Limiting
Page 89