Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 305

Show Commands
sap-ingress
Syntax sap-ingress [policy-id] [association | match-criteria]
Context show>qos
This command displays SAP ingress QoS policy information.
Description
policy-id — Displays information about the specific policy ID.
Parameters
Default
Values
associations- — Displays the policy associations of the sap-ingress policy.
match-criterion- — Displays the match-criterion of the sap-ingress policy.
Sample Output
Show SAP Ingress Output — The following table describes SAP ingress show command output.
Policy-Id
Scope
Description
Default FC
Criteria-type
Meter
Mode
7210 SAS M OS Quality of Service Guide
all SAP ingress policies
1 — 65535
Label
The ID that uniquely identifies the policy.
Exclusive —
single SAP.
Template —
SAPs on the router.
A text string that helps identify the policy's context in the con-
figuration file.
Specifies the default forwarding class for the policy.
IP —
used to select the appropriate ingress meter and corresponding
forwarding class for matched traffic.
MAC —
select the appropriate ingress meters and corresponding for-
warding class for matched traffic.
Displays the meter ID.
Specifies the configured mode of the meter (trTcm1 or srTcm).
Description
Implies that this policy can only be applied to a
Implies that this policy can be applied to multiple
Specifies that an IP criteria-based SAP ingress policy is
Specifies that a MAC criteria-based SAP is used to
Show Commands
Page 329