Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 165

dscp-out-profile
Syntax dscp-out-profile dscp-name
no dscp-out-profile
Context config>qos>network policy-id>egress>fc fc-name
This command specifies the out-of-profile DSCP name for the forwarding class. The
Description
corresponding DSCP value will be used for all IP packets requiring marking the egress on this
forwarding class queue that are out-of-profile.
When multiple DSCP names are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default out-of-profile dscp-name setting for
policy-id 1.
dscp-name — System- or user-defined, case-sensitive dscp-name.
Parameters
Default
Values
lsp-exp-in-profile
Syntax lsp-exp-in-profile lsp-exp-value
no lsp-exp-in-profile
Context config>qos>network policy-id>egress>fc fc-name
This command specifies the in-profile LSP EXP value for the forwarding class. The EXP value
Description
will be used for all LSP labeled packets requiring marking the egress on this forwarding class
queue that are in-profile.
When multiple EXP values are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default in-profile EXP setting.
Policy-id 2:
Default
Policy-id 3 — 65535:
lsp-exp-value — The 3-bit LSP EXP bit value, expressed as a decimal integer.
Parameters
Default
Values
7210 SAS M OS Quality of Service Guide
none
Any defined system- or user-defined dscp-name
Factory setting
Policy-id setting
none
0 — 7
Operational Commands
Page 173