Deleting Qos Policies - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
Deleting QoS Policies
A slope policy is associated by default with access and network egress pools. A default policy
may be replaced with a non-default policy, but a policy cannot be entirely removed from the
configuration. When a non-default policy is removed, the policy association reverts to the default
slope policy policy-id default. A QoS policy cannot be deleted until it is removed from all ports
where it is applied.
ALA-7>config>qos# no slope-policy slopePolicy1
MINOR: QOS #1902 Slope policy has references
ALA-7>config>qos#
Ports
The following CLI syntax examples can be used to remove slope policies from MDA ports:
CLI Syntax: config>port>access>egress>pool# no slope-policy name
Remove a Policy from the QoS Configuration
To delete a slope policy, enter the following command:
CLI Syntax: config>qos# no slope-policy policy-id
Example
7210 SAS M OS Quality of Service Guide
config>port>network>egress>pool# no slope-policy name
:
config>qos# no slope-policy slopePolicy1
Slope QoS Policies
Page 399
Advertisement
Table of Contents
