Removing Port Level Egress-Rate Command; Default Egress-Rate Values - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Basic Configurations

Removing Port Level Egress-Rate Command

To remove egress-rate command from a port, use the no option with the egress-rate command.
The rate for the egress-rate option and max-burst should not be used in this case.
CLI Syntax: config>port>ethernet# no egress-rate
The following displays the removal of egress-rate configuration from a port:
*A:Dut-1>config>port# no ethernet egress-rate
*A:Dut-1>config>port# info
----------------------------------------------
----------------------------------------------
*A:Dut-1>config>port#

Default Egress-Rate Values

By default no egress-rate is configured for a port.
Page 90
ethernet
exit
no shutdown
7210 SAS M OS Quality of Service Guide