Basic Configurations; Create A Network Queue Qos Policy - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Basic Configurations

A basic network queue QoS policy must conform to the following:
•
•

Create a Network Queue QoS Policy

Configuring and applying QoS policies other than the default policy is optional. A default network
queue policy is applied to all network ports (for7210 SAS M in Network mode) and access uplink
ports (for 7210 SAS M in access uplink mode).
To create an network queue policy, define the following:
•
•
•
Use the following CLI syntax to create a network queue QoS policy:
Network Queue FC
CLI Syntax: config>qos
*A:Dut-B>config>qos>network-queue# info detail
----------------------------------------------
7210 SAS M OS Quality of Service Guide
Each network queue QoS policy must have a unique policy name.
Queue parameters can be modified, but cannot be deleted.
Enter a network queue policy name. The system will not dynamically assign a name.
Include a description. The description provides a brief
FCs are mapped to 8 queues available at the port according to
to Queue-ID Map, on page
network-queue policy-name
description description-string
queue queue-id
rate cir cir-percent [pir pir-percent]
adaptation-rule [cir adaptation-rule] [pir adaptation-
rule]
description "Default network queue QoS policy."
queue 1
rate cir 0 pir 100
adaptation-rule cir closest pir closest
exit
queue 2
rate cir 25 pir 100
adaptation-rule cir closest pir closest
exit
queue 3
rate cir 25 pir 100
adaptation-rule cir closest pir closest
exit
queue 4
82.
Network Queue QoS Policies
overview of policy features.
Table 32, Forwarding Class
Page 195