Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 297

Service Ingress MAC QoS Policy Match Commands
dot1p
dot1p dot1p-value [dot1p-mask]
Syntax
no dot1p
Context config>qos>sap-ingress>mac-criteria>entry
The IEEE 802.1p value to be used as the match criterion.
Description
Use the no form of this command to remove the dot1p value as the match criterion.
None
Default
dot1p-value — Enter the IEEE 802.1p value in decimal.
Parameters
Values
dot1pmask — This 3-bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default
Values
dst-mac
dst-mac ieee-address [ieee-address-mask]
Syntax
no dst-mac
Context config>qos>sap-ingress>mac-criteria>entry
Configures a destination MAC address or range to be used as a Service Ingress QoS policy match criterion.
Description
The no form of this command removes the destination mac address as the match criterion.
none
Default
7210 SAS M OS Quality of Service Guide
0 — 7
Format Syntax
D
0xH
0bBBB
7 (decimal) (exact match)
1 — 7 (decimal)
Operational Commands
Example
4
0x4
0b100
Page 321