Applying Network Queue Policies; Ethernet Ports - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Applying Network Queue Policies

Apply network queue policies to the following entities:
•

Ethernet Ports

Use the following CLI syntax to apply a network queue policy to an Ethernet port in network
mode of operation.
The network-queue policy can only be applied on a network port.
CLI Syntax: config>port#
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
exit
Use the following CLI syntax to apply a network queue policy to an Ethernet port in access-uplink
mode of operation.
CLI Syntax: config>port#
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
ethernet
7210 SAS M OS Quality of Service Guide
Ethernet Ports
ethernet
ethernet
mode network
network
queue-policy "nq1-cbs"
exit
exit
exit
no shutdown
ethernet
access
uplink
queue-policy policy-name
mode access uplink
access
uplink
queue-policy "nq1-cbs"
exit
exit
exit
no shutdown
Network Queue QoS Policies
Page 197