Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 283
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
fc
Syntax
[no] fc fc-name [create]
Context
config>qos>sap-ingress
The fc command creates a class instance of the forwarding class fc-name. Once the fc-name is created,
Description
classification actions can be applied and can be used in match classification criteria.
The no form of the command removes all the explicit queue mappings for fc-name forwarding types. The
queue mappings revert to the default meters for fc-name.
fc-name — Specifies the forwarding class name for the queue. The value given for the fc-name must be one
Parameters
of the predefined forwarding classes for the system.
Values
Default
create — Mandatory keyword to create a forwarding class.
ip-criteria
Syntax
[no] ip-criteria [any|dscp-only] policy id
Context
config>qos>sap-ingress
IP criteria-based SAP ingress policies are used to select the appropriate ingress meter and corresponding
Description
forwarding class for matched traffic.
User can specify either 'any' or 'dscp-only' as the sub-criteria. The sub-criteria determines what fields can be
used to match traffic. The resource allocation for classification is affected by the sub-criteria in use. Please
see the section on SAP ingress resource allocation for L2 and L3 criteria for more information.
This command is used to enter the context to create or edit policy entries that specify IP criteria DiffServ
code point.
7210 SAS OS implementation will exit on the first match found and execute the actions in accordance with
the accompanying action command. For this reason entries must be sequenced correctly from most to least
explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries are
removed from a SAP ingress policy, the IP criteria is removed from all services where that policy is applied.
dscp-only
Default
any — -Specifies that entries can use any of the fields available under ip-criteria (Example - IP source, IP
Parameters
destination, IP protocol fields can be used) for matching
dscp-only — Specifies that entries can use only the DSCP field.
policy-id — -The policy-id that uniquely identifies the policy.
Values
7210 SAS M OS Quality of Service Guide
fc:
class
None (Each class-name must be explicitly defined)
1 — 65535
class: be, l2, af, l1, h2, ef, h1, nc
Operational Commands
Page 307
Advertisement
Table of Contents
