Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 299
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
src-mac
src-mac ieee-address [ieee-address-mask]
Syntax
no src-mac
Context
config>qos>sap-ingress>mac-criteria>entry
This command configures a source MAC address or range to be used as a service ingress QoS policy match
Description
criterion.
The no form of this command removes the source mac as the match criteria.
none
Default
ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
Parameters
Values
ieee-address-mask — This 48-bit mask can be configured using:
This 48 bit mask can be configured using the following formats
Format Style
Decimal
Hexadecimal
Binary
To configure all packets with a source MAC OUI value of 00-03-FA are subject to a match condition,
then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default
Values
Values
7210 SAS M OS Quality of Service Guide
HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal digit
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
0xFFFFFFFFFFFF (hex) (exact match)
0x00000000000000 — 0xFFFFFFFFFFFF (hex)
Operational Commands
Example
281474959933440
0x0FFFFF000000
0b11110000...B
Page 323
Advertisement
Table of Contents
